The following instructions are for separately purchased fenders
(Deluxe beach cruisers with thicker frame).
If you are technically challenged I strongly recommend to have bike shop install the fenders for you.

Parts needed for fender installation

• 2 fenders (front and rear)
• 8 small bolts and nuts
• 4 fender braces

The above parts comes in the package with fenders.
See photos:

You will also need small bolt for securing the rear fender and big bolt and nut for
securing the front fender.
They are included in the main box with beach cruiser sold
and located in the small plastic bag with reflectors.

FRONT WHEEL FENDER INSTALLATION

Use the 8 small nuts and bolts and attach braces to fenders.

Remove the front wheel and attach the front fender at the top of the fork.

Secure fender braces on the axle.
Place the wheel to the fork.
You have to apply pressure and widen the fork with your hands to be able to put the wheel on.

Tighten the nut on axle.
Adjust and tighten the bolt and nut on top of the fork.

Adjust the braces.
If you feel that the fenders are not straight push the braces and adjust the fender.
The goal is that fender should not touch tire.
Braces are flexible and has to be adjusted in case they don’t fit perfectly after you install them.

REAR WHEEL FENDER INSTALLATION

Completely remove the rear wheel.
You have to remove coaster brake.

Add fender braces using the small nuts and bolts.

Turn the bike upside down for further installation.

Secure the rear fender with small bolt located in the bottom of the bike.
No nut required.
Just screw it in.

Install the wheel back.
Put the chain on.

Attach fender braces on the rear axle and secure with axle nuts.
Attach and secure coaster brake.

It is all done! Enjoy your beach cruiser with fenders!